Agostino Ferrari hinges for Inset doors fitted to a framed cabinet. The mounting plate comes with pre-mounted euro-screws that require a 5mm diameter hole, they can be removed if not required, these hinges are mainly found in office, occasional furniture and display cabinets.
The chart below shows what reveal you will get if you change how far you position the 35mm hole (cup drilling) from the edge of the door using the supplied mounting plate. This chart is based on a 36mm frame fitted to a 18mm side panel. (Measurements are in mm)
| Cup Drilling | 3 | 4 | 5 | 6 | 7 |
| Reveal | 2 | 1 | 0 | -1 | -2 |
| Plate Position for 15mm door | 54 | 54 | 54 | 54 | 54 |
| Plate Position for 18mm door | 57 | 57 | 57 | 57 | 57 |
Features
- Overlay: Inset For A Framed Cabinet
- Opening Angle: 165 degrees
- Door Thickness: 16 - 22mm
- Side Thickness: N/A
- Cup Diameter: 35mm
- Cup Drilling Depth: 11mm
- Hinge Type: Clip On
- Material: Steel
- Hinge Finish: Nickel Plated
- Self Closing: Yes
- Soft Closing: No
- Adjustment: 3 way
- Pack Contents: 2 Hinges, 2 Plates
Tools & fittings for the job