Tutti Non-Sprung hinges for 16 - 20mm overlay ideal for 18mm carcass side thickness. The mounting plate comes with pre-mounted euro-screws that require a 5mm diameter hole, they can be removed if not required, these hinges are mainly found in office, occasional furniture and display cabinets.
The chart below shows what overlay you will get if you change how far you drill the 35mm hole from the edge of the door using the supplied mounting plate. (Chart is in mm)
Cup Drilling | 3 | 4 | 5 | 6 | 7 |
Overlay | 16 | 17 | 18 | 19 | 20 |
Plate Position | 37 | 37 | 37 | 37 | 37 |
Features
- Overlay: 12 - 16mm
- Opening Angle: 165 degrees
- Door Thickness: 16 - 22mm (Please note that a door thickness over 20mm will require a slight outer edge profile/chamfer)
- Side Thickness: 18mm
- Cup Diameter: 35mm
- Hinge Type: Clip On
- Material: Steel
- Hinge Finish: Nickel Plated
- Self Closing: No
- Soft Closing: No
- Adjustment: 3 way
- Pack Contents: 2 Hinges, 2 Plates
Tools & fittings for the job
Similar hinges